Confirmation Tone - Panasonic KX-NCP500 Features Manual

1.29.2 Confirmation Tone

Description
At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation tone
to extension users.
Tone 1
Tone 2
Tone 3-1
Tone 3-2
Tone 4-1
Tone 4-2
Tone 5
Conditions
•
Confirmation Tone Patterns
All confirmation tone patterns have a default (® 3.2.1 Tones/Ring Tones).
•
It is possible to eliminate each tone.
Type Description
a.
Sent when the setting is accepted.
b.
Sent when a call is received in voice-calling mode
(Alternate Receiving—Ring/Voice). The caller's
voice will be heard after the tone.
a.
Sent from an external paging device or an extension
before being paged.
b.
Sent when a call is received in Hands-free
Answerback mode.
a.
Sent before a conversation is established when
using the Paging feature.
b.
Sent when a conversation is established with the
extension in the following modes after the call
making operation:
•
Hands-free Answerback mode
•
Voice-calling mode (Alternate Receiving—Ring/
Voice)
c.
Sent when making a call to or from a doorphone.
Sent just before a conversation is established when
accessing the following features by the feature numbers:
•
Call Park Retrieve
•
Call Pickup
•
Hold Retrieve
•
Paging Answer
•
TAFAS
Sent when moving from a two-party call to a three-party
call. (e.g., Executive Busy Override, Conference,
Privacy Release, Two-way Record.)
Sent when moving from a three-party call to a two-party
call. (e.g., Executive Busy Override, Conference,
Privacy Release, Two-way Record.)
Sent when a call is placed on hold (including
Consultation Hold).
1.29.2 Confirmation Tone
Feature Guide 339