Panasonic KX-NCP500 Features Manual page 226

1.17.9 External Sensor
•
The following features cannot be used when a sensor call is received:
–
Alternate Receiving—Voice (® 1.5.3 Intercom Call)
–
Hands-free Answerback (® 1.4.1.4 Hands-free Answerback)
–
Consultation Hold/Call Hold (® 1.13.1 Call Hold)
–
Call Transfer (® 1.12.1 Call Transfer)
–
Executive Busy Override (® 1.8.2 Executive Busy Override)
•
Sensor call information is output on SMDR.
Installation Manual References
KX-NCP500/KX-NCP1000
3.7.1 OPB3 Card (KX-NCP1190)
3.7.4 EIO4 Card (KX-TDA0164)
3.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
KX-TDE100/KX-TDE200
3.7.1 OPB3 Card (KX-TDA0190)
3.7.4 EIO4 Card (KX-TDA0164)
3.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
KX-TDE600
3.9.1 OPB3 Card (KX-TDA0190)
3.9.4 EIO4 Card (KX-TDA0164)
3.11.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
PC Programming Manual References
3.58 [1-1] Slot—OPB3 Card Property
→ Input Signal Decision Time
→ Input Signal Detection Reopening Time
4.5 [2-3] Timers & Counters—Miscellaneous—
4.17 [2-8-3] Ring Tone Patterns—Call from Others—
7.7 [5-5] External Sensor
226 Feature Guide
External Sensor—Ring Duration
External Sensor—Ring Tone Pattern Plan 1–8