Specifications For Use With Ul Approval - Siemens SINAMICS S120 Combi User Manual

Additional system components
10.3 DRIVE-CLiQ Hub Module External DME20
10.3.7

Specifications for use with UL approval

Pre-assembled cables
Sensor/actuator cable, 5-pin, variable cable,
free cable end at straight socket M12-SPEEDCON,
cable length: 2, 5, 10, 15 m
SAC-5P-xxx-186/FS SCO
Up to 100 m on request
Phoenix Contact
Cables to be assembled by the user
Cable
Cable coil, black PUR/PVC, 5-pin
Conductor colors: brown/white/blue/black/gray
Cable length: 100 m
SAC-5P-100.0-186/0.75
Order number: 1535590
Phoenix Contact
Power supply
The DME20 must be connected to a 24 V power supply with voltage limitation.
● SITOP 6EP1x.. or 6ES7307..
● SINAMICS Control Supply Module 6SL3100-1DE22-0Axx
Pin assignment of the cable
Table 10- 24 Connection to X524 electronics power supply
Pin
1 (brown)
2 (white)
3 (black)
4 (blue)
5 (gray)
1) The colors stated refer to the cable specified above
204
Designation
Electronics power supply
1)
Electronics power supply
1)
Electronics ground
1)
Electronics ground
1)
Not connected internally
1)
Connector
Sensor/actuator connector, socket, straight, 5-pin, M12,
A-coded
Screw connection, metal knurl,
cable gland Pg9
SACC-M12FS-5CON-PG9-M
Order number: 1681486
Technical specifications
The connection voltage of 20.4 V – 28.8 V refers to
the (terminal) voltage at the DME20. This must be
taken into account when selecting the cable cross-
section and supply cable lengths.
Pins 1 and 2: jumpered internally
Pins 3 and 4: jumpered internally
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
SINAMICS S120 Combi