Sensor Module External Sme25; Description; Interface Description; Overview - Siemens SINAMICS S120 Combi User Manual

Encoder system connection

11.3 Sensor Module External SME25

11.3 Sensor Module External SME25
11.3.1

Description

Direct encoder systems outside the cabinet can be connected to the Sensor Module External
SME25. The SME25 evaluates these encoder systems and converts the calculated values to
DRIVE-CLiQ.
Direct encoder systems with EnDat 2.1 or SSI with SIN/COS (1 Vpp) incremental signals can
be connected, however without reference signal.
Neither motor nor encoder data are saved in the SME25.
11.3.2

Interface description

11.3.2.1

Overview

Figure 11-9
222
Interface description SME25
SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3