Connection Example; Drive-Cliq Interface - Siemens SINAMICS S120 Combi User Manual

11.3.2.2

Connection example

Figure 11-10 Connection of a direct encoder system via a Sensor Module External (SME)
11.3.2.3

DRIVE-CLiQ interface

Table 11- 9 DRIVE-CLiQ interface
Pin
1
2
3
4
5
6
7
8
A
B
Connector type RJ45 socket
Current consumption max. 0.25 A
The blanking cover for the DRIVE-CLiQ port is included in the scope of delivery.
Blanking covers (50 pieces) Order number: 6SL3066-4CA00-0AA0
Note
Only MOTION-CONNECT DRIVE-CLiQ cables may be used for connections. The maximum
cable length is 100 m for MOTION-CONNECT 500, and 75 m for MOTION-CONNECT
800PLUS cables.
SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
Signal name
TXP
TXN
RXP
Reserved, do not use
Reserved, do not use
RXN
Reserved, do not use
Reserved, do not use
+ (24 V)
M (0 V)
Encoder system connection
11.3 Sensor Module External SME25
Technical specifications
Transmit data +
Transmit data -
Receive data +
Receive data -
Power supply
Electronics ground
223