Installation - Siemens SINAMICS S120 Combi User Manual

Encoder system connection
11.1 Sensor Module Cabinet-Mounted SMC20
11.1.5

Installation

Installation
1. Slightly tilt the component backwards and attach it to the mounting rail using the hook.
2. Swivel the component on the mounting rail until the mounting slide at the rear audibly
3. Shift the components on the mounting rail to the left or right until they reach their final
Removal
1. First shift the mounting slide downwards at the lug to release the interlocking with the
2. Swivel the component towards the front and then remove it upwards from the mounting
212
latches
position
mounting rail
rail
①
Mounting slide
②
Mounting rail
Figure 11-3 Removal of a component from a DIN rail
2
1
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
SINAMICS S120 Combi