Siemens SINAMICS S120 Combi User Manual page 6

Preface
SINAMICS
You can find information on SINAMICS at:
http://www.siemens.com/sinamics.
Usage phases and the available tools/documents
Table 1
Usage phase
Orientation
Planning/configuration
Decision making/ordering
Configuring/installation
Commissioning
Usage/operation
Maintenance/Service
Target group
This documentation is intended for machine manufacturers, commissioning engineers, and
service personnel who use the SINAMICS drive system.
Benefits
This manual provides information on the components and functions of devices so that the
target group is capable of installing, setting up, testing, operating, and troubleshooting the
devices safely and correctly.
Standard scope
The scope of the functionality described in this document can differ from the scope of the
functionality of the drive system that is actually supplied.
It may be possible for other functions not described in this documentation to be executed in
the drive system. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
Functions that are not available in a particular product version of the drive system may be
described in the documentation. The functionality of the supplied drive system should only
be taken from the ordering documentation.
4
Usage phase and the available tools/documents
Tools
SINAMICS S Sales Documentation
SIZER configuration tool
SINAMICS S Catalogs
SINAMICS S120 Manuals
•
SINAMICS S120 Combi Manual
•
• SINUMERIK 828D PPU Manual
SINAMICS S120 Combi List Manual
•
SINUMERIK 828D Turning and Milling Commissioning Manual
•
SINAMICS S120 Function Manual FH1
•
SINAMICS S120 Combi List Manual
•
SINAMICS S120 Combi Manual
•
SINAMICS S120 Combi List Manual
•
SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3