Table of Contents
Advertisement
Safety notes
2.2 Requirements for special applications
2.1.3
Conformity with European directives
The CE marking on the device symbolizes the conformity with the following European
directives:
Electromagnetic
compatibility EMC
2014/30/EU
Atmosphère explosible
ATEX
2014/34/EU
2011/65/EU RoHS
The applicable directives can be found in the EU declaration of conformity of the specific device.
2.1.4
Improper device modifications
Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
● Only carry out modifications that are described in the instructions for the device. Failure to
2.2
Requirements for special applications
Due to the large number of possible applications, each detail of the described device versions
for each possible scenario during commissioning, operation, maintenance or operation in
systems cannot be considered in the instructions. If you need additional information not
covered by these instructions, contact your local Siemens office or company representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and development
purposes.
10
WARNING
observe this requirement cancels the manufacturer's warranty and the product approvals.
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to elec‐
tromagnetic compatibility
Directive of the European Parliament and the Council on the
harmonisation of the laws of the Member States relating to
equipment and protective systems intended for use in potentially
explosive atmospheres
Directive of the European Parliament and the Council on the
restriction of the use of certain hazardous substances in electri‐
cal and electronic equipment
SITRANS I300 Isolating power supply with EIA-485 interface
Operating Instructions, 01/2019, A5E45099319-AA
Advertisement
Table of Contents
