Approved Controls; Expansion Axes That Can Be Connected - Siemens SINAMICS S120 Combi User Manual

3.1.3

Approved controls

The S120 Combi is approved for operation with the following controls:
● SINUMERIK 828D with PPU versions
Table 3- 2
PPU version
240.2
241.2
260.2
261.2
280.2
281.2
3.1.4

Expansion axes that can be connected

The S120 Combi can be expanded with Motor Modules from the SINAMICS S120 Booksize
Compact series by one or two axes.
Table 3- 3 Expansion axes for the S120 Combi Power Modules
Motor Module Booksize Compact
Single Motor Module 3 A
Single Motor Module 5 A
Single Motor Module 9 A
Single Motor Module 18 A
Double Motor Module 2 x 1.7 A
Double Motor Module 2 x 3 A
Double Motor Module 2 x 5 A
NOTICE
Number of expansion axes
A maximum of two expansion axes can be connected to an S120 Combi Power Module, i.e.
two Single Motor Modules or one Double Motor Module.
For a description of the Motor Modules Booksize Compact, see Chapter "Motor Modules
Booksize Compact as expansion axes".
SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
– PPU 24x.2
– PPU 26x.2
– PPU 28x.2
Overview of the order numbers of the approved SINUMERIK 828D controls
Keyboard
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Width
50 mm
50 mm
50 mm
75 mm
75 mm
75 mm
75 mm
Order number (without CNC software)
6FC5370-4AT20-0AA0 (Turning)
6FC5370-4AM20-0AA0 (Milling)
6FC5370-3AT20-0AA0 (Turning)
6FC5370-3AM20-0AA0 (Milling)
6FC5370-6AA20-0AA0
6FC5370-5AA20-0AA0
6FC5370-8AA20-0AA0
6FC5370-7AA20-0AA0
Order number
6SL3420-1TE13-0AA0
6SL3420-1TE15-0AA0
6SL3420-1TE21-0AA0
6SL3420-1TE21-8AA0
6SL3420-2TE11-7AA0
6SL3420-2TE13-0AA0
6SL3420-2TE15-0AA0
S120 Combi Power Modules
3.1 Introduction
59