Motor Modules Booksize Compact as expansion axes
7.3 Interface description
7.3.2
X1/X2 motor connection
Table 7- 1
X1/X2 motor connection
1) For ring cable lugs in accordance with DIN 46234
7.3.3
X11/X12 motor brake connection
Table 7- 2
X11/X12 brake connection
Terminals
BR+
BR-
The circuit for protecting the brake against overvoltage is integrated in the Motor Module and does not need to be
installed externally.
124
Terminal
U2
V2
W2
PE connection
Designation
Brake connection +
Brake connection -
Technical specifications
Max. connectable cross-section: 6 mm
Type: Screw terminal 5 (see Chapter "Control cabinet
installation and EMC / connection system")
Tightening torque: 1.2 - 1.5 Nm
Single Motor Modules 3 A to 18 A
Threaded hole M5/3 Nm
Double Motor Modules 1.7 A to 5 A
Threaded hole M5/3 Nm
Technical specifications
Voltage 24 V DC
Max. load current 2 A
Min. load current 0.1 A
Max. connectable cross-section 2.5 mm
Type: Spring-loaded terminal 1 (see Chapter "Control
cabinet installation and EMC / connection system")
Manufacturer: Wago;
order number: 721-102/026-000/56-000
The brake connector is included in the scope of delivery.
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
2
1
1
2
SINAMICS S120 Combi