Additional system components
10.2 DRIVE-CLiQ Hub Module DMC20
10.2.4
Dimension drawing
Figure 10-7
10.2.5
Installation
Installation
1. Tilt the component backwards slightly and attach it to the DIN rail using the hook.
2. Push the component towards the DIN rail until you hear the mounting slide at the rear
3. You can now move the component to the left or right along the DIN rail, until it reaches its
196
Dimension drawing of the DRIVE-CLiQ Hub Module DMC20, all data in mm and (inches)
latch into position.
final position.
SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3