Temporary Tone Dialing; Chain Dialing - AT&T EL52206 User Manual

Telephone operation
Options while on calls

Temporary tone dialing

If you have dial-pulse (rotary) dialing service only, you can temporarily switch
from pulse-tone dialing to touch-tone dialing during a call.
During a call, press TONE .
1.
2. Use the dialing keys to enter the desired number. The
telephone sends touch-tone signals.
3. The telephone automatically returns to pulse dial
mode after you end the call.

Chain dialing

While on a call, you can initiate a dialing sequence from numbers stored in
the directory, caller ID log or redial list. Doing this can be useful if you need to
access numbers other than telephone numbers (such as account numbers or
access codes).
To access the directory while on a call:
Press MENU/
1.
2. Press /SELECT again to choose Directory.
MENU
Press CID or DIR to scroll or use the dialing keys (0-9)
3.
to find the desired entry (see Search by name on page
37).
4. Press /SELECT. The telephone automatically dials
MENU
the displayed number.
To access the caller ID log while on a call:
Press MENU/
1.
2. Press CID or DIR to scroll to Caller ID log, then press
/SELECT.
MENU
Press CID or DIR to scroll to the desired entry. Press
3.
(pound key) to view other dialing options, if necessary.
See View dialing options on page 43 for more details.
/SELECT. The telephone automatically dials
4. Press
MENU
the displayed number.
.
SELECT
.
SELECT
26
Phone 0:01:30
888-722-7702
ECO
10:30 11/20
PM
Directory
ECO
Charlie Johnson
888-883-2445
ECO
ROBERT BROWN
800-360-4121
ECO
10:30 11/20
PM