Station Service Status Display; General Description; Service Conditions - NEC UNIVERGE SV8300 System Maintenance Manual

STATION SERVICE STATUS DISPLAY

General Description

This feature enables to readout the setting status of the service for each station.

Service Conditions

(1) The services whose setting status can be readout by this feature are the features that are set to single
line telephone, Multiline Terminal, PS, virtual station and built-in modem. The features that are set
to DESKCON and ISDN telephone are not supported.
(2) Station numbers entered by the setting status readout command (CME4 Y=00, 01) are the station
number set to single line telephone, Multiline Terminal, virtual station, virtual station for PS, and
built-in modem. The station numbers for ISDN telephone cannot be entered ([DATA ERROR] is
displayed if entered).
(3) The terminal connection status and the line status cannot be readout in offline. For the other features,
the status can be readout regardless of online or offline.
(4) For the line status, when Sub Line is accommodated to Multiline Terminal and My Line number is
input to the first data, the status "Line is busy (1)" is displayed when incoming/outgoing calls to My
Line, and the status "Line is idle (0)" is displayed when incoming/outgoing calls to Sub Line.
(5) For Day/Night mode change, Day mode (D)/Night mode (N)/Mode A (A)/Mode B (B) are displayed
even if two kinds of modes (Day mode/Night mode) are set by CM65 Y=29.
Chapter 1 MAINTENANCE SERVICES
STATION SERVICE STATUS DISPLAY
1-48
NWA-033627-001 Rev.4.0
95ch1001.fm
NOVEMBER/21/2008