NEC UNIVERGE SV8300 System Maintenance Manual page 49

7. Number of sending/received control packets: XXXXXXXX
• For PROTOCOL=1 (iLP-PM)
1: Total number of sending control packets
2: Number of re-sending control packets
3: NG number of re-sending control packets
4: Total number of received control packets
5: Total number of received error packets
6: Number of error sequences
7: Number of overlapped sequences
• For PROTOCOL=2 (PROTIMS)
1: Total number of packets sending
2: Number of ACK request packets sending
3: Number of packets re-sending
4: Number of third retry occurrence of re-sending
5: Total number of packets received
6: Number of ACK request packets received
7: Total number of error packets received
• For PROTOCOL=4 (UDP/H.245)
1 : Total number of sending packets
2 : Number of master mode UDP sending packets
3 : Number of master mode UDP re-sending packets
4 : Number of slave mode UDP sending packets
5 : Number of slave mode UDP re-sending packets
6 : Number of H.245 packets sending
7 : Total number of received packets
8 : Number of master mode UDP received packets
9 : Number of master mode UDP timeout packets
A: Number of master mode UDP NG packets
B: Number of slave mode UDP received packets
C: Number of slave mode UDP timeout packets
D: Number of slave mode UDP NG packets
E: Number of H.245 packets received
F : Number of H.245 timeout, etc.
Chapter 1 MAINTENANCE SERVICES
NOTE 3
1-37
VoIP LOG COLLECTION
NWA-033627-001 Rev.4.0
95ch1001.fm