Programming Procedure - NEC UNIVERGE SV8300 System Maintenance Manual

Programming Procedure

(1) To execute the fault logs/call logs collection, do the following programming.
START
CM0B Provide the call log collection with the
VoIPDB.
NOTE:
Provide the fault log collection with the
VoIPDB.
CM12 Assign Service Restriction Class C to the
required stations.
CM15 Allow call log collection in Service Restriction
Class C assigned by CM12 Y=07.
NOTE:
Allow fault log collection in Service Restric-
tion Class C assigned by CM12 Y=07.
A
DESCRIPTION
When changing this data for
VoIPDB accommodated in a remote
unit, execute the system data copy
by CMEC Y=8 to the remote unit.
When changing this data for
VoIPDB accommodated in a remote
unit, execute the system data copy
by CMEC Y=8 to the remote unit.
Chapter 1 MAINTENANCE SERVICES
• Y=2XX (VOIP Port [2] + Unit No. [01-50])
(1) 90
(2) 0 : To provide
1 : Not provided
• Y=2XX (VOIP Port [2] + Unit No. [01-50])
(1) 91
(2) 0 : Not provided
1 : To provide
• Y=07
(1) X-XXXXXXXX: IP Station No.
(2) 00-15 : Service Restriction Class C
• Y=194
(1) 00-15: Service Restriction Class C assigned
by CM12 Y=07
(2) 0 : Allow
1 : Restricted
• Y=195
(1) 00-15: Service Restriction Class C assigned
by CM12 Y=07
(2) 0 : Restricted
1 : Allow
1-42
VoIP LOG COLLECTION
DATA
NWA-033627-001 Rev.4.0
95ch1001.fm