NEC UNIVERGE SV8300 System Maintenance Manual page 92

FAULT
FAULT
KIND
CONTENT
NUMBER
02B CS/ZT fault
occurred
Remedial Action on Each Fault Kind
FAULT INFORMATION
Fault Kind Details: SYS-ID download
Fault Kind Details: CS/ZT make busy
Fault Kind Details: CS/ZT data load
Fault Kind Details: B channel make
Fault Kind Details: CS/ZT operation
Fault Kind Details: LCCH sending
Fault Kind Details: Carrier selection
[North America/Latin America
Only]
2-24
Chapter 2 TROUBLESHOOTING
failure
Make the CS/ZT busy or idle
failure condition by CME5 Y=3.
failure
busy failure
parameter change
failure
position failure
No specific action is required.
failure
FAULT INFORMATION DISPLAY
REMEDIAL ACTION
When input the SYS-ID
1
from PCPro, check if the
number is correct.
Check the CS/ZT is CS/
2
ZT without SYS-ID.
Make the CS/ZT busy or
3
idle condition by CME5
Y=3.
Turn OFF and ON the
4
CS/ZT power switch.
Make the CS/ZT busy or
1
idle condition by CME5
Y=3.
Turn OFF and ON the
2
CS/ZT power switch.
Continued on next page
NWA-033627-001 Rev.4.0
95ch2001.fm
JULY/17/2009