NEC UNIVERGE SV8300 System Maintenance Manual page 109

(2) At Called Station
START
At the called station, the telephone
does not ring.
The call is routed to a station other
than the dialed number.
Ringing Signal is not disconnected
after going off-hook.
END
CHECK (1) Volume Control of the telephone set.
REPLACE (1) LC blade
(2) Telephone set
CHECK
(1) System Data Programming for destination
station Number: CM05 Y=0, CM10 Y=00
(2) Call Forwarding-All Calls feature is acti-
vated at the destination station.
REPLACE (1) LC blade
(2) CPU blade
(3) Telephone set
2-41
Chapter 2 TROUBLESHOOTING
FAULT INFORMATION DISPLAY
NWA-033627-001 Rev.4.0
95ch2001.fm