Change Device Name; Set Date And Time - TRENDnet TEW-821DAP User Manual

TRENDnet User's Guide

Change Device Name

Management > Administration
For easy access, you can also enter the Management page using the domain name
(http://device name) based on the device name that you have configured in this section.
By default, the domain name is the same as your access point model name
ÍNote:
(http://tew-821dap).
1
Log into your access point management page (refer to
on page 10).
2
Click Management > Administration.
3
On the Device Name Settings section, enter the new device name to display on your
network to identify the access point in the Device Name field.
4
Click Apply to save the changes or Cancel to discard the changes.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Log in to Management Page"

Set Date and Time

Management > Time and Date Settings
The accuracy of the system clock is important for scheduling and accurate logging. You
can synchronize the system time with your computer, or automatically check the time
accuracy with a network time server (NTP server).
1
Log into your access point management page (refer to
on page 10).
2 Click Management > Time and Date Settings.
3
View or modify the following settings in Time Configuration section:
• System Time: Current date and time.
If you do not want to use the automatic time configuration (enable NTP server)
ÍNote:
then modify time manually in Date and Time Settings section.
• Time Zone: Select the time zone of the country or region you are currently in. The
TEW-821DAP will set its time based on your selection.
4
Check Enable Daylight Saving if your time zone has daylight savings. Enter the start
time and end time of daylight savings.
TEW-821DAP
"Log in to Management Page"
45