TRENDnet User's Guide
3
Configure or view any of the following parameters:
• Enable: Redundant control to enable or disable the particular SSID.
• VID: Virtual LAN ID.
• No VLAN tag: Management VLAN packets are not tagged by default.
• Specified VLAN ID: Select this if you want to separate the management VLAN.
Enabling tagging will redirect all services, including web management and DHCP,
to a specific VLAN, specified in VLAN ID field. (1 ~ 4094).
• SSID: Showing the human readable SSID.
• Wifi Security: Wireless security set to the SSID.
4
Click Apply to save the management VLAN settings or Cancel to discard the changes.
© Copyright 2015 TRENDnet. All Rights Reserved.
Configure Traffic Shaping Settings
Management
>
Wireless Traffic Shaping
Traffic shaping regulates the flow of packets leaving an interface to deliver improved
Quality of Service.
To configure the traffic shaping settings, do the following:
1
Log into your access point management page (refer to
on page
10).
2
Click Management > Wireless Traffic Shaping.
TEW-821DAP
"Log in to Management Page"
40