TRENDnet TEW-821DAP User Manual page 16

TRENDnet User's Guide
• Extension Channel: When you choose manual channel selection and 20/40MHz
or 40MHz in channel width, you can choose which neighbour channel you want to
combine, upper channel or lower channel, or auto to let the device to decide.
• Channel (Frequency): If you want to setup fixed channel, choose a channel
number to switch your radio frequency. Otherwise, check auto to select the
channel automatically which is selected by default. (When you choose 20/40MHZ
or 40MHz channel HT mode, the channel selection list is shorter. Four marginal
channels are reserved for channel expansion.)
• AP Detection: Before you setup your TEW-821DAP wireless settings, you may want
to know what signal are currently broadcasting. Click Scan to do a site survey and
list the running access points around you.
© Copyright 2015 TRENDnet. All Rights Reserved.
• Current Profile: General setups options for your 2.4GHz / 5GHz wireless
connection. You can setup up to eight SSIDs for different groups of users. Do any
of the following:
ƒ Click the Enable checkbox to enable the wireless profile.
ƒ Click Edit to modify the settings and after modifications are done, click Apply.
or

Wireless Settings:
ƒ SSID: Select the human readable SSID to be easily identified. You can choose
any combination with 1 to 32 letters.
ƒ Hide SSID: Select this checkbox to hide the SSID in the outgoing beacon frame
so a station cannot obtain the SSID through scanning using a site survey tool.
ƒ Separate Stations: If you enable station separation, wireless clients (a.k.a.
STAs) associated with this SSID cannot communicate to each other directly
even if they are in the same wireless group.

Wireless Security:
ƒ Security Mode: Choose between WEP-OPEN, WEP-SHARED, WEP-AUTO, WPA-
Personal, WPA2-Personal, WPA2-Personal Mixed, WPA-Enterprise, WPA2-
Enterprise Mixed. Please see more in
page 17.
TEW-821DAP
"Wireless Networking and Security" on
16