2.4G Wireless Client List; 5G Wireless Client List - TRENDnet TEW-821DAP User Manual

TRENDnet User's Guide
• In the Network section:
ƒ MAC Address: Display the MAC address of the access point.
ƒ IP Address: Display address of the TEW-821DAP.
ƒ Subnet Mask: Display network range of IP address.
ƒ Default Gateway: Display the default route going further from TEW-821DAP subnet.
ƒ Primary Domain Name Server: Display primary domain server address.
ƒ Secondary Domain Name Server: Display secondary domain server address.
• On the 2.4GHz / 5GHz Wireless section:
ƒ Operation Mode: Display which wireless mode the 2.4GHz / 5GHz interface is
set to.
ƒ Wireless Mode: Display which 802.11 wireless mode is set and running on the
2.4GHz / 5GHz interface.
ƒ Channel Width: Wireless Channel Bandwidth.
ƒ Channel (Frequency): Display which 2.4GHz / 5GHz wireless channel (and
frequency) is in use.
ƒ SSID List: Display information on SSID, MAC address, and security mode.
© Copyright 2015 TRENDnet. All Rights Reserved.

2.4G Wireless Client List

Status > 2.4G Wireless Client List
To view all wireless clients connected to the 2.4GHz interface, do the following:
1
Log into your access point management page (refer to
on page 10).
2
Click Status > 2.4G Wireless Client List.

The list of connected wireless clients is displayed on the screen.
3
Click Kick and Ban to send this client to MAC address filter list.

5G Wireless Client List

Status > 5G Wireless Client List
To view all wireless clients connected to the 5GHz interface, do the following:
1
Log into your access point management page (refer to
on page 10).
2
Click Status > 5G Wireless Client List.

The list of connected wireless clients is displayed on the screen.
3
Click Kick and Ban to send this client to MAC address filter list.
TEW-821DAP
"Log in to Management Page"
"Log in to Management Page"
29