Management; Administration; Administrator Settings; Device Name Settings - TRENDnet TEW-826DAP User Manual

Ac2200 tri-band poe+ indoor
Table of Contents

Advertisement

TRENDnet User's Guide

Management

Administration

Management > Administration

Administrator Settings:

1. Log into your management page (see
8).
2. Click on the Management tab and click Administration.
3. Review the settings and click Save to save settings.
Account: Change the login user name in this field
Password: Change the login password in this field
Idle Timeout: Change the length of time that the access point can idle
before timing out. The duration can be between 120 – 3600 seconds. (By
default it is set to 120 seconds)
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access the management
page" on page

Device Name Settings:

Management > Administration
1. Log into your management page (see
8).
2. Click on the Management tab and click Administration.
3. Review the settings and click Save to save settings.
4. Click on the Save button then click on the flashing Apply/Discard button
located on the top left section, and click Save & Apply to apply the settings.
Note: Your configurations are not saved and applied until you click on Apply/Discard
Changes button. The Save & Apply step saves and applies all configuration changes.
TEW-826DAP
"Access the management
page" on page
43

Advertisement

Table of Contents
loading

Table of Contents