Execute Diagnostics Test - TRENDnet TEW-821DAP User Manual

TRENDnet User's Guide

Execute Diagnostics Test

Management > Diagnostics
There are 2 network tools you can use on the TEW-821DAP: ping and traceroute.
To use ping test, do the following:
1
Log into your access point management page (refer to
on page 10).
2
Click Management > Diagnostics.
3
Enter the following information:
• Target IP address to the IP field.
• Ping packet size to the Packet Length field.
• Number of pings to the Number of Pings field.
4
Click Ping to start the test.
The result is displayed as shown on the following image:
© Copyright 2015 TRENDnet. All Rights Reserved.
"Log in to Management Page"
To use the traceroute test, do the following:
1
Log into your access point management page (refer to
on page 10).
2 Click Management > Diagnostics.
3
Enter the target machine IP address or domain name to the Target field.
4
Click Traceroute to start the test.
The result is displayed as shown on the following image:
TEW-821DAP
"Log in to Management Page"
48