Table of Contents
Advertisement
•
Remote access to the PC is possible:
Remote access is achieved via the UltraVNC application working from the TCP/IP 5900 port.
The default access account is:
User name: TSUser
•
•
Password: TS
To modify the access mode, go to programme properties.
TSUser belongs to the Administrators group in Windows.
Service
FTP
Remote access
•
Disconnect the USB mass storage device after maintenance is performed. Leaving a USB mass storage device connected
prevents the PC from restarting properly.
IMPORTANT!!
The PC is dedicated exclusively to running the TelevisGo application.
The installation of any other type of application could impair system stability.
The only installation permitted is an anti-virus software.
Users can choose an anti-virus that best suits their protection policy.
Bear in mind however that an anti-virus in action can adversely affect system performance.
Make sure the anti-virus does not block the TCP/UDP ports used by Televis Compact.
2.5 ACCESSORIES AVAILABLE
The following accessories can be provided for the network connection:
•
GSM modem:
RS232 GSM modem based on SIEMENS type TC35 technology.
•
Serial Adapter232: An interface to connect between the TelevisGo RS232 port (COM1 or COM2) and the RS485 network.
•
LanAdapter:
LanAdapter is an Ethernet /RS-485 interface module that allows communication via LAN between a
monitoring system and a device network.
The LanAdapter supports controller networks with either Micronet/Televis or MODBUS protocol.
•
Wifi LanAdapter:
Like the LanAdapter but with a WiFi / RS-485 interface.
•
BusAdapter
Device with a TTL/RS-485 communication interface to connect Eliwell controllers to cabled supervision
and monitoring networks.
•
RadioAdapter:
Same as a BusAdapter but with wireless interface for connecting TTl/RS-485 networks.
SmartAdapter:
•
The SmartAdapter is a ModBUS protocol converter for Televis networks. It allows TelevisNet software to
connect to ModBUS protocol devices via an RS-485 interface.
2.6 SOFTWARE TOOLS
OFFLINE CONFIGURATOR
Offline Configurator is a PC application software that configures controller networks offline by defining abstract structured rules.
Users can create configurations to assign names, alarms and scheduled actions to be applied to the network.
The tool can be downloaded from the Eliwell website on completion of second-level registration.
Register at www.eliwell.it and request level 2 access to the confidential area.
TelevisGo
Default Account
User name: Go
Password: GoZilla
User name: TSUser
Password: TS
TCP/IP ports
Connection application
21
Any FTP client
5900
UltraVNC
Page 9/68
Advertisement
Table of Contents
