Configuring The Device Network - Eliwell TelevisGo User Manual

Family of devices used to monitor, control and manage commercial refrigeration installations from a distance
Table of Contents

Advertisement

5.2.2 CONFIGURING THE DEVICE NETWORK

To set up a network of devices, go to:
Settings
To access this section, data logging must be suspended (see Data Logging section).
Now click the
icon. This page opens:
View
Out of network
Discovery
Interface
LAN Adapter
A list of all available and previously defined interfaces is displayed (see the Defining Interfaces section) along with associated
settings (name, ID, address....).
Set the scan range using pop up menus 1, 2, 3 and 4.
The default ranges are: 00:00/14:14 for Micronet networks and 00:00/15:15 for Mixed networks.
To start scanning or to find network devices, click the
NOTE:
Scanning the full range can take a few minutes.
Likewise, it could take even longer if there are any unused addresses (the system makes more than one attempt when it doesn't
receive a reply) or if a Mixed network is being used.
On completion, the following window opens:
Interface
LAN Adapter
Address
02:00
Line A identifies the network scanned. Line B and subsequent lines list devices associated to the network.
The colour of each line has a specific meaning:
GREEN: new device located in the network
BLACK: existing network device
GREY:
device not located, part of previous network but possibly no longer present.
RED:
device for which TelevisGo has no internal driver.
On completion, click Save to save all data logged.
Click the
icon to go back a menu.
If you change page without saving, any changes made will be lost (the same as clicking Cancel).
IMPORTANT: in the following circumstances, a second scan must be performed:
• If one or more devices have been added
• If the drivers of one or more TelevisGo controllers have been updated.
• If you have enabled/disabled one or more controller resources by changing some parameters.
• A device changed alarm is displayed.
TelevisGo
Interfaces
Naming
Select all
ID
Address
0
192.168.0.1
Interface
identifier
0
Description
0 02:00 0.00:00 ID 974LX
Scan
Deselect all
Manage Interfaces
Fieldbus
LanAdapter
Page last update on: 7.39.34
icon.
Address
192.168.0.1
Discovery range
00
00
14
From
to
1
2
3
Devices
1
State
New
14
4
A
B
Page 19/68

Advertisement

Table of Contents
loading

Table of Contents