Table of Contents
Advertisement
D - Telephone call:
•
Name:
•
Telephone number:
•
Signal strength:
•
Test phone call
E - Commands:
•
Name
•
Type:
•
Command on alarm activated: To establish what the device has to do if an alarm is activated.
•
Command on disabled alarm:
IMPORTANT: always add the recipient's international dialing code before the phone number (for phone calls and TXT
messages). (e.g.: for Italy, enter +39).
6.2.2.4 TIME INTERVALS
To set the alarm operation time intervals, go to:
Settings
To access these sections, data logging must be suspended (see Data Logging section).
A window like this will open:
View
Alarm categories
A
Time intervals
Name
Settings
P1
from Monday at 00:00 to Sunday at 23:59
All intervals set will be shown in the box on the left (A).
The following commands are presented at the top (C):
•
Add or
:
•
Remove or
:
•
Edit or
:
•
Save or
:
•
Cancel or
:
Click Add (
) or Edit (
) to activate the right-hand part of the window; you will be able to enter all details of time intervals. Click
Save or
to save the new time interval, click Cancel or
If you change page without saving, any changes made will be lost (the same as clicking Cancel).
TelevisGo
To enter the name assigned to the action.
To enter the telephone number to be called (e.g.: +39 333 7600000).
To establish the signal strength of the modem connected to TelevisGo (as a percentage).
To see if the settings entered are correct (the system tries to call the number provided).
To enter the name assigned to the action.
To identify which device in the network to be targeted.
To establish what the device has to do after an alarm has been deactivated.
Alarms
Time intervals
Actions
Details
Name*
B
Type:
D
01
To add a new interval.
To remove an interval saved previously.
To modify an interval saved previously.
To save changes made.
To cancel changes made.
Time Intervals
Add
Daily
>
00
01
00
Page last update on: 7.39.34
to exit without saving.
Remove
Edit
Save
C
Cancel
Page 40/68
Advertisement
Table of Contents
