Table of Contents
Advertisement
Data
Information
Computer » Information » Network settings
General
Network settings
IP Address
Obtain an IP address automatically (DHCP)
Use the following IP adress:
Proxy Settings
Proxy - SOCKS - Domain resolution
Proxy - Ignore local addresses
Proxy - Enabled
Proxy - Protocol
Proxy - Server address
Proxy - Server port
Proxy - User
Proxy - Password
Depending on the network (contact the network administrator for necessary information), enter the following information:
1) IP address: set if the DHCP (dynamic address) or manual IP (static address) is to be used.
If the automatic IP has been set, when the device is restarted, it will connect using the values received from the network,
•
which may vary each time.
•
If the manual IP has been set, when the device is switched on, it connects using the same values all the time, which must
be saved in the following order: IP address, Subnet mask and Gateway.
2) DNS address: set if the automatic DNS (dynamic address) or manual DNS is to be used.
3) Proxy Configuration: set proxy server parameters (the system must be restarted after setting these parameters):
•
SOCKS - Domain name resolution : native DNS, Proxy or DNS via proxy
•
Ignore for local addresses: when selected, TelevisGo will not use the proxy server to resolve addresses within its own
sub-network.
•
Enable: select if the SOCKS server requires authentication.
•
Protocol version: 4, 4a, 5 or HTTP Proxy
•
Server address: IP address of SOCKS server
•
Server port: SOCKS server access port
•
User: user name for SOCKS server authentication
•
Password: password for SOCKS server authentication.
To save data entered, click the
Click the
icon or Cancel to exit without saving the changes.
If you change page without saving, any changes made will be lost (the same as clicking Cancel).
5.2 NETWORK SCAN AND DEVICE NAMING
5.2.1 DEFINING INTERFACES
To define system interfaces, go to:
Settings
To access this section, data logging must be suspended (see Data Logging section).
In the new page that opens, click the
A window will open in which you can enter/edit interfaces.
To add a network, click the
TelevisGo
Alarms
Tools
Settings
Upgrade
Reboot
Update license
IP Address
10
Subnet mask
255
Gateway
10
Native DNS
:
SOCKS 5
icon or Save.
Interfaces
icon or Manage interfaces.
icon or Add, and a screen with the following options will open:
Computer
Edit
Save
DNS
Obtain the DNS server IP address automatically
Use the following server DNS addresses:
39
4
103
255
255
0
39
4
12
Page last update on: 7.39.34
Scan
Cancel
Preferred DNS server:
10
39
4
15
Alternate DNS server:
10
39
4
16
Page 17/68
Advertisement
Table of Contents
