Table of Contents
Advertisement
3. MECHANICAL INSTALLATION
3.1 GENERAL WARNINGS
IMPORTANT!
Always make sure the device is switched OFF before touching connections.
All operations must be carried out by qualified personnel.
Do not mount devices in extremely damp and/or dirt-laden areas; they are designed for use in places with ordinary or normal levels
of contamination.
Make sure the area near the cooling slots is ventilated.
The admissible ambient temperature range for correct operation is between –5°C and +40°C.
3.2 PACKAGE CONTENTS
The package contains:
•
TelevisGo device
•
Power unit and power cable
•
CD with manuals, list of compatible devices and examples of how to upgrade device
3.3 MECHANICAL INSTALLATION
TelevisGo was designed for wall or panel-mounting.
Secure the device to the wall/panel with 4 screws (not supplied) to match the holes illustrated in the figure below.
3.4 CONNECTIONS ON THE DEVICE
The following connections are to be found on the front and back of the controller:
TelevisGo
Hole A
Hole C
VGA
USB
USB
LAN
COM3
240.00 mm
274.00 mm
KBD
COM2
COM4
Hole B
Hole D
1)
Connection to 12V DC power supply
2)
COM1 (RS232) port
3)
VGA monitor connection
4)
4 USB connections
5)
COM3 (RS485) port
6)
COM4 (RS485) port
7)
LAN RJ45 connection
8)
COM2 (RS232) port
9)
PS2 keyboard connection
10) LED power supply and HDU
11) 2 USB connections
12) Audio minijack socket
13) PowerON/powerOFF button
14) Not used
Page 10/68
Advertisement
Table of Contents
