Table of Contents
Advertisement
A window like this will open:
Select all
Arrangement
A
3 Columns
Filter resources
Analog Inputs
B
Digital Inputs
States
Alarms
The page will show the analogue resources of all recognized Modbus devices (F). If there are no Modbus devices, this page would
be empty.
To mark a resource as an energy resource, click the relative check box (to the left of the name) (D). To mark all resources of a device,
click the device check box (D).
The
and
buttons either collapse and expand individual devices to hide or show associated resources.
To set the data logging time period of energy resources, click the data-logging interval box (C), set the interval in the text box that
opens, then click OK. The interval must be more than 15 minutes.
The number of columns to display (A) can be defined and the resources filtered (B).
The following buttons are presented at the top:
•
Select All: to select all devices in the list.
•
Deselect All: to deselect all devices in the list.
•
Expand All: to view the resources of all devices in the list.
Collapse All: to hide the resources of all devices in the list.
•
Save: to save settings entered.
•
Cancel: to cancel all settings entered.
•
•
Cancel Filters: to go back to default filter properties, with all resources selected.
If you change page without saving, any changes made will be lost (the same as clicking Cancel).
TelevisGo
Deselect all
Expand all
LanAdapterWiFi (192.168.0.1)
D
0.00:00 ID 974/A LX 2
Analog input 1
Analog input 2
0.00:01 ID 974/A LX 2
0.00:02 ID 974/A LX 2
0.00:03 ID 974/A LX 2
0.00:04 ID 974/A LX 2
Collapse all
Registration interval:
- 15 Devices
0.00:05 ID 974/A LX 2
0.00:06 ID 974/A LX 2
0.00:07 ID 974/A LX 2
0.00:08 ID 974/A LX 2
Analog input 1
Analog input 2
0.00:09 ID 974/A LX 2
Save
Cancel
C
01:00:00
0.00:10 ID 974/A LX 2
0.00:11 ID 974/A LX 2
0.00:12 ID 974/A LX 2
0.00:13 ID 974/A LX 2
Analog input 1
Analog input 2
0.00:14 ID 974/A LX 2
E
Cancel filters
F
Page 34/68
Advertisement
Table of Contents
