Action - Eliwell TelevisGo User Manual

5.4.2.3 Action

The Action section allows you to set the Type of action to be performed.
Action
Type
Command
Command
Manual defrost activation
Manual defrost activation
Lock keyboard
Unlock keyboard
Action
Type
Parameter writing
Type
Parameter map
File name
Map_1.dat
Action
Type
Parameter writing
Type
Parameters
Parameters
Label
Value
Label Value
Set -2
HAL 1
LAL -5
TelevisGo
A command type action specifies the command to be applied to the
selected devices (see below).
The command drop-down menu lists all commands for all devices
currently included in the network configuration.
A write parameters (parameter map) action requests the file map name
to be applied each time the action is performed.
The file name must be specified in the File Name box.
To make sure TelevisGo successfully performs the operation, the file
map must be loaded from the system update page (see section entitled
"System Update Modes").
For write parameter type actions, the list of parameters to be written and
their associated values must be entered manually. At least one parameter
must be entered.
To enter a new parameter, write the label name in the Label box, the value
in the Value box then click the
added to the list below.
If there is a ??? label, TelevisGo will remove it from the list as soon as a
new pair is added.
If a pair already exists with the same label, TelevisGo will overwrite the
previously inserted value.
To remove a previously inserted label/value pair from the list, click the
button. If you remove the last parameter in the list, TelevisGo will
automatically add a ???/??? pair.
Important! TelevisGo distinguishes between upper and lower
case in label names.
button. The label/value pair will be
Page 29/68