Table of Contents
Advertisement
Quick
Attribute
--- Select ---
Interface
--- Select ---
Value
Set value
Filter
Address
Model
Name
Save
To create a rule at the resource level, click the
click the
icon of the rule you have just created. The following boxes opens on the right of the screen:
Filter
ID
Name
Type:
All
Save
NOTE:
1)
The jolly character ? (question mark) can be any character.
2)
The jolly character * (asterisk) can be any sequence of 0 or more characters.
3)
A filter selects a group of resources on the basis of defined rules. The scheduled action is applied to all devices that the filtered
resources belong to.
4)
A selector with no interface rules and no selected resource type will select all resources in the current configuration.
Once you have defined a filter, click the
In both cases, you will be returned to the previous screen.
If you change page without saving, any changes made will be lost (the same as clicking Cancel).
TelevisGo
The Filter (below) has three attributes that can be used to define the
rule.
The Address field filters devices by their address. It only accepts
combinations of numbers and ? (question mark) and * (asterisk) jolly
characters, separated by a semi-colon (00:00, 00:*, 9:1?).
The Model field filters devices by model type. Jolly characters ?
(question mark) and * (asterisk) can be used.
The Name field filters devices by their name. Jolly characters ?
(question mark) and * (asterisk) can be used.
The Rapid (top) box allows you to set the three Address, Model and
Name attributes by selecting values on the basis of the devices listed
for the current configuration.
Select the Attribute you want to assign a value to, select an Interface
from those listed for the configuration, select a value from those listed,
then click the Set Value key. The field in the Filter area will assume this
value.
Once all changes have been made to selector properties, click Save.
icon for the device rule that you want to add the rule to. To modify the properties,
The Filter has three attributes that can be used to define the rule.
The ID field filters resources by their identification number. It only
accepts specific combinations of characters, numbers and ? (question
mark) and * (asterisk) jolly characters. The ID of a resource consists of 3
upper case letters, 5 numbers followed by a hyphen or other text. For
example: INP40001-1, ALM00300.
The Name field filters resources by their name translated in the
language selected in the previous step. Jolly characters ? (question
mark) and * (asterisk) can be used.
The Type field filters resources by type (all, analogue only, digital only,
status only, alarms only).
Once all changes have been made to selector properties, click Save.
icon (or Save) to save it, or the
icon (or Cancel) to delete it.
Page 32/68
Advertisement
Table of Contents
