Data Archive - Eliwell TelevisGo User Manual

Family of devices used to monitor, control and manage commercial refrigeration installations from a distance
Table of Contents

Advertisement

7.2.2 DATA ARCHIVE

Logged data can be viewed in table format in the various ways described below. To open or view the page, go to:
Data
The following screen opens:
Profile
--- New profile ---
Quick
Last hour
Custom
NOTE: The first time you use this function, there are no default profiles.
If a profile has been selected, click
page (step 2).
Click
to go to the next page. The next screen is structured as outlined below:
A
Arrangement
2 Columns
B
Profile
New profile
Last hour
C
Time intervals
From
21/07/2010 15.38.59
to
21/07/2010 15.38.59
D
1 Network configurations
1 From18/06/2010 17.43.18
E
Filter resources
Analog Inputs
Digital Inputs
States
Alarms
F
Undersampling
Show analogs only
Number of records to show
The functions of each part of the interface are:
(A) Layout, to choose a display with 1, 2, 3, 4 or 5 columns.
(A) Profile, identifies the name of the profile selected (if it is new, the profile type is specified).
(C) Time intervals, identifies the time interval set for the display.
(C) Network configurations, identifies the number of network configurations present and since when.
(E) Resource Filters, shows/hides analogue and digital resources, statuses and/or alarms.
(D) Sub-sample, when enabled using the check box and when the number of records to view has been specified (n), sub-
samples the number of records present by the selected interval (C) (see NOTE under "Sub-sampling function").
(G) list of network devices / resources. All resources can be selected/deselected when deciding which data to view/
download.
Clicking the
button hides/shows the list of resources for each device.
TelevisGo
Historical Data
Select Profile Default
Select a relative range (Quick) or absolute range (Custom). In the
former case, there is a series of preset intervals that start counting
backwards from the current date (by 1, 2, 3, 6, 12 hours, 1 or 2 days). In
the latter case, the start/stop date/time must be specified.
to go straight to the data presentation page (step 3); otherwise, you will be taken to the next
Select all
Deselect all
.0. LanAdapterWiFi (192.168.0.1)
0.02:00 ID 974LX
Analog input 1
Door state
Alarm output
Compressor 1
Defrost 1
Evaporator fans 1
999 Compact
- 1 device
999.14:14 TelevisCompact
Modem signal strength
Relay 1
Relay 2
Compressor 1
Defrost 1
Evaporator fans 1
Expand all
Collapse all
- 2 devices
0.03:00 ID 974LX
Analog input 1
Door state
Alarm output
Compressor 1
Defrost 1
Evaporator fans 1
Page last update on: 7.39.34
ID
G
Page 47/68

Advertisement

Table of Contents
loading

Table of Contents