Table of Contents
Advertisement
7.2.5 REAL TIME ALARMS
This page only opens when data logging is running.
Go to:
Alarms
The following screen opens:
View
Confirm
Filter devices
Description
A
Alarms filter
B
Active alarms
Confirmed alarms
Show helpers
C
Show table header
Legend
The page is structured to show the hierarchy of devices and each of their alarm-type only resources, listed below. For active alarms,
the last row on the right shows how long the alarm has been active for.
The functions of each part of the interface are:
•
(A) Device filters, you can filter alarms by controller name in Description.
(B) Alarm filter, allows you to select alarms by type (active, confirmed alarms
•
•
(C) View headings, to view/hide table headings and key.
•
(D) List of alarm resources present in device, already filtered in (B).
•
(E) Shows how long each alarm has been active.
The following buttons are presented at the top (F):
•
Expand All: to view alarms for all devices in the list.
•
Collapse All: to hide alarms for all devices in the list.
Cancel Filters: to restore the display of all alarms and cancel device (A) and alarm (B) filters.
•
To acknowledge all alarms present, click Confirm. The following window opens:
View
Confirm
A
Filter devices
C
Description
Show helpers
B
Show table header
Legend
The functions of each part of the interface are the same as for the Summary page:
•
(A) Device filters, you can filter alarms by controller name in Description.
•
(C) View headings, to view/hide table headings and key.
•
(D) List of alarm resources present in device, already filtered in (B).
Alarms can be selected using the check box to the left of each alarm (D).
The following buttons are presented at the top (E):
•
Select All: Select all alarms in the list.
:
•
Deselect All
Deselect all alarms in the list.
•
Expand All: to view alarms for all devices in the list.
•
Collapse All: to hide alarms for all devices in the list.
Cancel Filters: to restore the display of all alarms and cancel device (A) and alarm (B) filters.
•
•
Confirm: to confirm selected alarms. Confirmed alarms change icon type (from red to yellow).
Confirming an alarm does not change alarm status; the only related purpose is to alert that the alarm has been
viewed (for instance, when there is more than one supervisor, a confirmed alarm means that "someone has already
acknowledged it").
TelevisGo
Alarm Status
D
0.02:00 ID 974LX
NOLINK
0.02:01 ID 974LX
999.14:14 TelevisCompact
Modem signal strength low
Select all
Deselect all
0.02:00 ID 974LX
NOLINK
D
0.02:01 ID 974LX
999.14:14 TelevisCompact
Modem signal strength low
Expand all
Collapse all
Cancel filters
F
Warning: filters
33 giorni
Page last update on: 7.39.34
Expand all
Collapse all
Cancel filters
33 giorni
Page last update on: 7.39.34
E
12 days
33 days
) (active alarms cannot be deselected).
E
Confirm
12 days
33 days
Page 52/68
Advertisement
Table of Contents
