General System Settings - Eliwell TelevisGo User Manual

5.2.6 GENERAL SYSTEM SETTINGS

This menu can be used to set the display language, the communication ports, and alarm alert transmission times. To activate the
menu, go to:
Settings
To access these sections, data logging must be suspended (see Data Logging section).
The following page opens:
Sistema
Reboot the system in order to make the new settings active.
Languages
System language
Ports
Web server - Communication port
Data transfer - Communication port
In "System" you can set the following
1) LANGUAGES:
• System language:
2) PORTS:
• Web server - Communication Port:
• Data transmission - Communication port:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The following page is displayed when TelevisTwin is clicked:
TelevisTwin
System
Reboot the system in order to make the new settings active.
Sending life test notifications
Twin - Life test - Sending period
Twin - Life test - Delay on first send
Twin - Life test - Retry interval
Twin - Life test - Retry duration
In "TelevisTwin" you can set the following:
1) LIFE TEST REPORT SENDING:
• Twin - Life test - Sending period:
• Twin - Life test - First sending delay:
• Twin - Life test - Retry interval:
• Twin - Life test - Retry duration:
The life test will be sent to TelevisTwin if at least one "TelevisTwin" action is configured within the system (see chapter entitled
"Alarm management").
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
TelevisGo
General Settings
Alarms
TelevisTwin Media
English
80
8080
to set the language used for creating the alarm messages and communication with
systems external to TelevisGo (TWIN or third party systems).
to identify the port to be used for the WEB connection (e.g. 80)
to identify the port to be used to download data (e.g. 8080)
Alarms Media
01:00:00
[0 seconds .. 30 days]
00:15:00
>= 0 seconds
00:01:00
[0 seconds .. 30 days]
01:00:00
[0 seconds .. 30 days]
to set how often a life report is sent.
to set how long to wait after switching on before sending a life report.
to set the interval between 2 consecutive life report sending attempts
to set the maximum interval in which to attempt life report sending.
System
Edit
[1 .. 65535]
[1 .. 65535]
Page last update on: 7.39.34
Cancel
Save
Cancel
Edit Save
Page last update on: 7.39.34
Page 22/68