Table of Contents
Advertisement
•
Interface type: type of network interface:
a)
Serial Adapter
b) LanAdapter (TCP/IP)
Serial Adapter (Fig.1) example:
•
Port: physical communication port used by TelevisGo (COM)
•
Protocol: type of communication protocol.
a)
Micronet
b) Mixed & Smart (Micronet with Modbus sub-network after a
SmartAdapter)
c)
Mixed native (Micronet and Modbus together)
Lan Adapter example (Fig.2):
•
Address: set the device IP address.
•
Port: virtual TCP/IP navigation import.
•
Protocol: type of communication protocol.
a)
Micronet
b) Mixed & Smart (Micronet with Modbus sub-network after a
SmartAdapter)
c)
Mixed native (Micronet and Modbus together)
•
Fieldbus: types of network available:
a)
BusAdapter: RS485 serial network
b) LanAdapter: LAN type network
c)
LanAdapter Wifi: LAN network + Wifi
d) LanAdapter Radio: LAN network + RadioAdapter
e)
RadioAdapter: RS485 network + RadioAdapter
f)
SmartAdapter: RS485 network + SmartAdapter
icon or Edit, after selecting the network to be modified, the same screen as "Add" opens where you can
On selection of the
change all previously entered values.
Click the
icon or Save to save all data entered or changes made. When using a LANAdapter network, we recommend you always
use the "Test connection" key to check communication between TelevisGo and the device itself.
Click the
icon or Cancel to exit without saving the changes.
To remove a network, select it then click the
Click the
icon to go back a menu.
If you change page without saving, any changes made will be lost (the same as clicking Cancel).
TelevisGo
icon or Remove.
Details
Interface
SerialAdapter
type
Port
Protocol
LanAdapter
Fieldbus
BusAdapter
Fig.1
Details
Interface
SerialAdapter
type
LanAdapter
Address
192
56789
Port
Protocol
Micronet
Fieldbus
LanAdapter
Fig.2
Micronet
168
1
1
Page 18/68
Advertisement
Table of Contents
