Table of Contents
Advertisement
6 different types of action may be created:
•
TelevisTwin:
•
Email:
•
TXT via modem:
•
Telephone call:
•
Commands:
•
Relays:
The types of controls presented (D) depends on the selection made from the drop-down menu (C).
IMPORTANT: Actions are only active when entered in an alarm category.
Depending on the type of action selected, the following windows open:
A - TelevisTwin
Details
Enabled
Type:
TelevisTwin
Name
Address
192.168.0.23
Address 1
Address 2
SMS
+393337600000
Signal strength: 37%
Send test SMS
D - Telephone call
Details
Enabled
Type:
Phone Call
Name
Telephone number
+393337600000
Signal strength: 37%
Send test SMS
Once all selections have been made, click Save (
If you change page without saving, any changes made will be lost (the same as clicking Cancel).
A - TelevisTwin:
•
Name:
•
Address:
•
Address 1:
•
Address 2:
•
TXT:
•
Signal strength:
B - Email:
•
Name:
•
Email:
•
Send test email
C - TXT via modem:
•
Name:
•
Telephone number:
•
Signal strength:
•
Send test SMS
TelevisGo
Enter the IP addresses of a TelevisTwin to which any alarm messages should be sent.
Enter an email address to which any alarm messages should be sent.
Enter the telephone number you want TXT messages to go to in the event of an alarm.
Enter the telephone number you want to call in the event of an alarm.
Set the commands to be sent to one or more devices in the event of an alarm.
Set the condition of the 2 relays in the event of an alarm.
Details
Enabled
Type:
Port
8080
Name
Port
Port
Email address
Phone Call
Make test phone call
) to save changes made, or Cancel (
To enter the name assigned to the action.
To enter the main IP address of the device (e.g.: 192.168.0.23) and the corresponding port (e.g.: 8080).
To enter an alternative IP address 1 and the corresponding port.
To enter an alternative IP address 2 and the corresponding port.
To enter the telephone number you want TXT messages to go to (e.g. +39 333 7600000).
To establish the signal strength of the modem connected to TelevisGo (as a percentage).
To enter the name assigned to the action.
To enter the email address to which alarm alerts should be sent to.
To see if the settings entered are correct (the system tries to send an email to the address
provided).
To enter the name assigned to the action.
To enter the telephone number you want TXT messages to go to (e.g. +39 333 7600000).
To establish the signal strength of the modem connected to TelevisGo (as a percentage).
To see if the settings entered are correct (the system tries to send a TXT message to the number
provided).
B - Email
Email
eliwell@invensys.com
Send test email
C - TXT via modem
Details
Enabled
Type:
SMS via Modem
Name
Telephone number
+393337600000
Signal strength: 37%
Send test SMS
E - Commands
Details
Enabled
Type:
Commands
Name
Device
0.02:00 ID 974LX
Command on activating alarm
Command
Keyboard Locked
Command on inactivating alarm
Command
Keyboard Unlocked
) to cancel them.
Make test phone call
Page 39/68
Advertisement
Table of Contents
