Table of Contents
Advertisement
The following controls will be visible:
•
(A) Device selected signals the Address, Description and Name of the selected device.
(B) Filter parameter 1, to filter parameters by Group, Label or Description.
•
(C) Filter parameter 2, there are three pairs of check boxes, each with a different function:
•
•
Selected rows/Unselected rows(*): filters the selected or unselected rows. When both check boxes are clicked, all
rows are shown.
•
Cells empty/Cells contain value(*): filters rows with or without user-inserted values. When both check boxes are
clicked, all rows are shown.
•
Valid data/Data incorrect or missing(*): filters rows with or without valid data. When both check boxes are clicked,
all rows are shown.
•
(D) Key, to see how to tell editable parameters from non-editable ones.
•
(E) Load parameter map, to load a map from file. Clicking Browse will open a window to select a file.
•
(F) lists parameters (filtered and unfiltered).
(*) If both check boxes in a pair are deselected, the table will be empty.
Parameters can be selected using the relative check box to the left of the label (H).
The values to be set can be entered using the enter values text box (I).
The following buttons are presented at the top (G):
•
Select All selects all parameters displayed.
•
Deselect all deselects all parameters displayed.
Copy from default copies default values to the "Enter values" column.
•
•
Copy from device copies values currently read by device to the "Enter values" column.
•
Read can be used to read the value of the selected parameters saved in the device.
Write can be used to write the values in the "Enter values" text box to the selected devices.
•
•
Save parameter map can be used to save the parameter map with the new values entered.
•
Load parameter map loads a parameter map which was previously saved to disk and selected using the relevant
box (E).
•
Cancel Filters cancels any previously configured filters (B)
Print the current parameter map.
•
7.3.2 RVD
To Acess this function, go to:
Functions
The following screen opens:
Filter devices
Description
A
The following controls will be visible:
•
(A) Device filters, to filter by device description.
•
(B) View list of network devices grouped by interface.
•
(E) Expand/hide devices in an interface.
Devices can be selected using the relative radio button to the left of the address (C).
TelevisGo
RVD
Expand all
ID
Interface
LAN Adapter
0
Address
B
02:00
C
02:01
Compact
999
Address
D
Collapse all
Cancel filters
Address
Protocol
192.168.0.1
Micronet
N/A
Page last update on: 7.39.34
Fieldbus
LanAdapter
Name (short)
Description
ID 974LX
0.02:00 ID 974LX
IC 974LX
0.02:01 ID 974LX
BusAdapter
Name (short)
Description
E
Page 56/68
Advertisement
Table of Contents
