Table of Contents
Advertisement
Participating in Meetings
2. To block your own video and replace it with a static slide, access the call menu. From the
1
XT Series web interface, select Privacy from the top bar under the tabs. From the
2
endpoint, select ok/menu > Privacy Options > Privacy(see
3
audio and video
4
The camera moves to its sleep position when it is disabled, or on the XT Executive the
5
embedded camera's LED turns off.
6
The system sends a placeholder slide to remote participants, and displays the
7
your display.
8
Alternatively, you can hide your video. You can choose this preference: From the XT Series
9
web interface, select Administrator Settings > System > Customization >
10
General.From the endpoint's in-call menu, select Configure > Advanced > System >
11
Customization. At the Privacy Options menu, select Hide Video.
12
3. To block your audio and video and hide your participation in the meeting by removing your
13
space in participants' video layout, access the in-meeting settings. From the XT Series web
14
interface, select Meeting > Hide Myself. From the endpoint's in-call menu, select Meeting
15
Options > Hide Myself.
16
This feature is only available when your endpoint hosts the meeting on its built-in MCU.
17
18
19
4. To block your video by default, access the call settings. From the XT Series web interface,
20
select Basic Settings > Call-Answer Mode > General. From the endpoint's main menu,
21
select Configure > Calling.
22
December 2017
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
on page 81). Alternatively, you can remove it from the video layout.
Figure 70: Hiding your presence in a meeting
Avaya Scopia
DRAFT—December 15, 2017—1:33 PM (UTC)
Figure 69: Blocking your own
®
XT Series User Guide
icon on
82
Advertisement
Table of Contents
