Avaya Scopia XT Executive User Manual page 27

the XT Series and its XT Remote Control Unit to pair them. By default all remotes and endpoints
1
use the same code 01.
2
Procedure
3
1. Access the general settings. From the XT Series web interface, select Basic Settings >
4
General. From the endpoint's main menu, select Configure > General.
5
You can use the XT Remote Control Unit's initial default pairing to perform this task.
6
7
8
2. Enter a two-digit numeric code between 01 and 96 in the Remote Control Code field.
9
3. From the web interface only, select Save.
10
4. On the Simplified XT Remote Control Unit, press the * and # keys simultaneously until its
11
RED light blinks twice. On the advanced remote control unit, press the RED and GREEN
12
keys simultaneously until the GREEN light becomes RED.
13
14
15
December 2017
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
Figure 12: Setting the XT Remote Control Unit Code
Figure 13: Setting the code on the XT Remote Control Unit
Avaya Scopia
DRAFT—December 15, 2017—1:33 PM (UTC)
®
XT Series User Guide
Controlling the XT Series
[1...96]
27