Avaya Scopia XT Executive User Manual page 48

Starting a New Call
in to your endpoint. The endpoint address you give out can be an IP (like 1.2.3.4), or an H.323
1
alias (like john_smith) or a URI address (like john@company.com). If you invite endpoints outside
2
your network, verify with your system administrator that your endpoint's address is valid for
3
external endpoints.
4
Your call is securely encrypted when it shows a padlock icon
5
administrator to configure encryption (see Deployment Guide for Avaya Scopia
6
Important:
Using encryption is subject to local regulation. In some countries it is restricted or limited for
7
usage. For more information, consult your local reseller.
8
Procedure
9
1. To call a new endpoint, access the direct call screen. From the XT Series web interface,
10
select Make your Call > Basic Options > Direct Call. From the endpoint's main menu,
11
select Call, or press
12
13
14
Enter the dial string and select Call, or press ok/menu on the XT Remote Control Unit.
15
The dial string can be the endpoint's number, or an H.323 alias like john_smith, or a URI
16
address like john@company.com.
17
Important:
Your organization may also have implemented a dial plan, which defines various dial
18
prefixes to determine the characteristics of a call. For example, you may be able to dial
19
8 before the videoconference number for a lower bandwidth call, or 6 for an audio-only
20
call. For more information on the dial plan in your organization, contact your system
21
administrator.
22
2. To dial a recently contacted endpoint, access the recent calls list. From the XT Series web
23
interface, select Make your call > Basic Options > Recent Calls. From the endpoint's
24
main menu, select Call , or press
25
Select the entry to dial, and then select Call or press ok/menu on the XT Remote Control
26
Unit.
27
3. To dial a saved contact, access the list of contacts. From the XT Series web interface,
28
select Make your call > Contacts. From the endpoint's main menu, select Contacts.
29
December 2017
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
on the XT Remote Control Unit.
Figure 29: Enter a new dial string to contact an endpoint
on the XT Remote Control Unit.
®
Avaya Scopia
DRAFT—December 15, 2017—1:33 PM (UTC)
on the monitor. Ask your system
XT Series User Guide
®
XT Series).
48