Avaya Scopia XT Executive User Manual page 105

Field
Resolution
Bit rate
Audio Alert
Ignore Mute on
Playback
Upload Video
December 2017
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
Description
• Equinox Recording Server: Select to only record meetings to the network, even if
a local USB storage device is connected. You can only record to the network if your
Equinox Solution includes a recording server, the XT Series is managed by Equinox
Management, and the meeting is hosted by an external Scopia Elite MCU or the
Equinox Conferencing Media Server (or an older model). For details, contact your
administrator.
Select the video resolution to use when recording meetings to a local USB storage
device. The frame rate is limited to 25fps. For best quality, use the default 1080p
resolution, but use a lower value if your media player does not support higher
resolutions.
When you change the resolution, the system automatically selects the optimal bitrate
for this resolution.
You cannot change the video resolution for meetings recorded to the network. If you
selected Automatic as the Location, this resolution is applied only when recording to
the USB device.
Select the bitrate to determine the file size when recording meetings to a local USB
storage device. To use less disk space, select a lower bitrate. For the best results, use
the default value for your chosen resolution.
Bitrate is the speed of data flow. Higher video resolutions require higher bitrates to
ensure the video is constantly updated, thereby maintaining smooth motion. If you
lower the bitrate, you lower the quality of the video. In some cases, you can select a
lower bitrate without noticing a significant drop in video quality; for example during a
presentation or when a lecturer is speaking and there is very little motion. Bitrate is
often measured in kilobits per second (kbps).
To estimate the space you need for the recording, see
based on the bitrate on page 107. You can see how much recording time is available
on your target disk when you access the Recording menu (see
Meetings on page 94).
You cannot change the bitrate for meetings recorded to the network. If you selected
Automatic as the Location, this bitrate is applied only when recording to the USB
device.
When recording meetings to a local USB storage device, you can indicate to all
participants that the meeting is being recorded. Select Yes to enable an audio
message alert at the beginning of the videoconference. This alert is also sent to late
participants.
When recording meetings to the network, an alert is always sent to participants.
Select Yes to send the audio to the connected remote side when viewing a recording,
even if the volume on the endpoint is muted. For more information about the sound
settings, see Adjusting the Default Volume Settings
connect headphones as described in
page 46.
Follow the prompts to upload a video recording from your PC/Mac to a USB. You can
then play the video recording from your USB.
Avaya Scopia
DRAFT—December 15, 2017—1:33 PM (UTC)
Enabling and Configuring Recording
Table 14: Typical file sizes
on page 66. For privacy, you can
Connecting Headphones to the XT Executive
®
XT Series User Guide
Recording
on
Table continues...
105