Avaya Scopia XT Executive User Manual page 39

2. Decide if the monitor's image needs adjusting, by verifying if the white border of the
1
triangles in the top left and bottom right corners are fully visible on all sides.
2
If the image is centered correctly, skip this procedure and select Next.
3
4
5
3. Press 1 to highlight the triangle in the top left corner in blue.
6
4. Use the arrow keys to position the image, so all sides of the white border of the triangle are
7
visible in the screen, then press ok/menu.
8
5. Press 2 to highlight the triangle in the bottom right corner in blue.
9
6. Adjust the image position in the same way, until all sides of the triangle border are visible,
10
then press ok/menu.
11
7. To continue with the Quick Setup Wizard, select Next (see
12
Settings
13
If your monitor is 4K and your system is an Avaya Scopia
14
adjustment is not applied.
15
Related links
16
Configuring Basic Settings with the Quick Setup Wizard
17
Configuring Basic Network Settings
18
About this task
19
This procedure describes how to set up the basic network settings and the IP address of the XT
20
Series as part of the Quick Setup Wizard. To modify advanced network settings, see Deployment
21
Guide for Avaya Scopia
22
December 2017
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
Figure 22: Examining the image position
on page 39).
®
XT Series.
Avaya Scopia
DRAFT—December 15, 2017—1:33 PM (UTC)
Configuring Basic Network
®
XT7000 Series, graphic
on page 35
®
XT Series User Guide
Applying basic settings
39