Table of Contents
Advertisement
1
2
Table 16: Adjustment options for the monitor
Option
Adjustment Mode
Top, Left, Bottom,
Right
4. From the web interface only, select Save.
3
Issues with two monitor setup
4
You may need to optimize the display settings on the XT Series endpoints.
5
Solution
6
• Check that the XT Series HD1 and HD2 output are connected to the video source plug on the
7
monitor. If the monitor model has more than one selectable HD video source, use the same
8
one on both.
9
• Use HD cables of the same model and length and verify that the connectors are not
10
damaged.
11
• Access the general monitor settings. From the XT Series web interface, select Administrator
12
settings > I/O connections > Monitor > General. From the endpoint's main menu, select
13
December 2017
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
Figure 100: Adjusting the monitor
Description
Select Menu, presentation (default) to adjust both the system menu
and presentation, local or received.
Select Menu to adjust the system menus only.
Note:
Adjustment Mode is not applicable to 4K monitors.
Drag the sliders to the required sizes until the menu or presentation
borders are visible on the monitor.
You can also adjust the image for the monitor displaying the system
menu, in the quick setup wizard as described in
Position
on page 38.
®
Avaya Scopia
DRAFT—December 15, 2017—1:33 PM (UTC)
Resolving Monitor Display Problems
XT Series User Guide
Adjusting the Image
119
Advertisement
Table of Contents
