Avaya Scopia XT Executive User Manual page 49

Select the entry to dial, and then select Call or press ok/menu on the XT Remote Control
1
Unit.
2
4. To join a meeting hosted elsewhere, call the endpoint or MCU which hosts the meeting,
3
using any of the above dial methods.
4
5. To host a meeting on your built-in MCU by dialing out to other participants:
5
a. Call the first participant (see
6
b. Call others to join. From the XT Series web interface, select Make your Call > Basic
7
Options > Direct Call / Contacts. From the endpoint, within the meeting with the first
8
participant, press ok/menu and select Participants > Invite a new participant > By
9
Address / From Contacts.
10
11
12
c. Select a contact or enter a dial string to call the next participant.
13
d. Repeat to add more participants.
14
6. To host a meeting on your built-in MCU by giving your endpoint's contact details, be sure to
15
give the correct information.
16
To accept an incoming call, select Accept.
17
December 2017
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
Starting a Meeting
Figure 30: Inviting a new participant from the endpoint interface
Avaya Scopia
DRAFT—December 15, 2017—1:33 PM (UTC)
on page 47).
®
XT Series User Guide
Starting a Meeting
49