Avaya Scopia XT Executive User Manual page 43

Field
Authentication Name
Authentication Password
Use SIP Server
Server Address
2. Select Done to complete the Quick Setup Wizard.
1
3. To configure advanced SIP settings, such as the preferred transport protocol, see
2
Deployment Guide for Avaya Scopia
3
Related links
4
Configuring Basic Settings with the Quick Setup Wizard
5
Installing Avaya Scopia
6
Executive)
7
About this task
8
This procedure describes how to configure your XT Executive (only) to navigate its menus with a
9
keyboard and mouse by installing Avaya Scopia
10
Windows or Mac (see
11
Note:
You cannot install the Avaya Scopia
12
the Yosemite operating system. The Yosemite operating system does not allow you to install
13
packages obtained from outside of the Apple Store. However, there is a workaround available
14
to enable you to obtain and run the installation package if you have the Yosemite operating
15
system (or a higher operating system, such as El Capitan or Sierra). For more information,
16
see Resolving download problems
17
The Avaya Scopia
18
Before you begin
19
1. Verify your computer is running either Windows XP/Vista/7/8, or if it is a Mac, verify it is
20
running OSX 10.x or higher.
21
2. Connect your computer to the XT Executive (see
22
using the DVI port
23
3. Perform the Quick Setup wizard, which ends with the Avaya Scopia
24
installation, or install it at any time from the web interface.
25
December 2017
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
Description
When connecting over SIP, this name is displayed on the monitors
participating in the videoconference (for example, John-Smith, or
9th-Floor-Room) .
If necessary, enter the name for authenticating the XT Series with
the SIP server. It can be the same as the User parameter.
If necessary, enter the password for authenticating your XT Series
with the SIP server.
Enable registering the system to the SIP server by selecting Yes.
For redundant SIP deployments, you can enter information for up
to three SIP servers, as described in Deployment Guide for Avaya
Scopia
Enter the DNS name or IP address of the SIP server, used to
register the endpoint.
®
XT Control to Use Keyboard and Mouse (XT
Navigating Menus with the Keyboard and Mouse
®
on page 124.
®
XT Control utility can only be installed from the endpoint's web interface.
on page 72).
Avaya Scopia
DRAFT—December 15, 2017—1:33 PM (UTC)
®
XT Series.
®
XT Series.
on page 35
®
XT Control, a small standalone program for
XT Control installation package on a Mac that is running
Connecting a Computer to the XT Series
®
XT Series User Guide
Applying basic settings
on page 29).
®
XT Control
43