Table of Contents
Advertisement
Participating in Meetings
Recorded videoconferences use one monitor only. During recording, the auxiliary monitor displays
1
the same video layout as the primary monitor.
2
Before a call, your monitor(s) display your own video, except on the XT Executive which shows
3
the computer content by default.
4
Meeting moderators can also change the video layout for all participants in a meeting (see
5
Changing the Video Layout for all Participants
6
Procedure
7
1. To cycle through the most commonly used video layouts, press the Layouts
8
XT Remote Control Unit repeatedly.
9
2. To view all available layouts, press and hold the Layouts
10
Control Unit, or press ok/menu and then select Layouts.
11
The choices of layouts depend on the number of streams to display and the number of
12
connected monitors. The group icon
13
represents local video. The graph icon
14
When a participant shares content in a meeting hosted by a Scopia
15
can choose from an additional set of layouts designed to optimize screen space (known as
16
gallery layouts or MCU). This requires Avaya Scopia Solution version 8.3.2 or later.
17
Note:
Gallery layout is not available when receiving Web Collaboration.
18
19
20
December 2017
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
on page 92).
represents remote video, while the single icon
Figure 68: Changing video layout during a call (example)
®
Avaya Scopia
DRAFT—December 15, 2017—1:33 PM (UTC)
key on the XT Remote
represents the presentation.
XT Series User Guide
key on the
®
Elite 6000 MCU, you
80
Advertisement
Table of Contents
