Avaya Scopia XT Executive User Manual page 40

Getting Started
Procedure
1
1. Access the Quick Setup Wizard from the endpoint, as described in
2
Settings with the Quick Setup Wizard
3
4
5
2. Enter the following values:
6
Table 5: Configuring the IP address
Field Name
IP Address Mode or
Automatic IP Address
IP address
Subnet mask
Gateway (IP Address)
DNS (Server IP
Address)
December 2017
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
on page 35, and skip to this step.
Figure 23: Defining IP Settings
Description
Determines if the IP address is dynamically allocated (using DHCP), or
if you manually designate a static IP address. You must use only static
addresses for:
• XT Telepresence deployments
• Units on a public network
• SIP deployments where the unit is secured with a TLS certificate, if
the certificate request has been tied to a specific IP address.
Enter the system static IP address. For dynamic IP addresses, this field
displays the current IP address.
Enter the subnet mask associated with the IP address. For dynamic IP
addresses, this field displays the current subnet mask.
Enter the default gateway static IP address. The gateway is used to
route information between two subnets, for example, between the
headquarters and a partner site. For dynamic IP addresses, this field
displays the current gateway IP address.
Enter the DNS server IP address. The DNS server translates domain
names into IP addresses. For dynamic IP addresses, this field displays
the assigned DNS server IP address.
For web collaboration and cloud connection to Avaya Equinox
Management, you must insert a valid DNS address.
®
Avaya Scopia
DRAFT—December 15, 2017—1:33 PM (UTC)
XT Series User Guide
Configuring Basic
40