Table of Contents
Advertisement
212
If and when
● Disconnect the subwoofer's speaker cable.
● Completely remove the hand controlled wheel from the centre of the
subwoofer speaker by turning it in an anticlockwise direction.
● Remove the subwoofer speaker under which the tools and anti-puncture
kit can be found.
● After use, replace the tools and anti-puncture kit in the same place and
position in which they were found so as to ensure that the speaker is well
seated in its housing.
● Place the subwoofer speaker facing in the direction indicated by the ar-
row and with the word "FRONT" facing forward.
● Reconnect the speaker cable and firmly rotate the securing wheel clock-
wise so that the subwoofer system and wheel are held firmly in place.
Components
Fig. 142 Components of the vehicle tool kit
The vehicle tool kit depends on the vehicle equipment. The following is a
description for a vehicle with all options.
The individual elements of the vehicle tool kit
Screwdriver with hexagon socket in the handle for unscrewing or screw-
1
ing the wheel bolts once loosened. The screwdriver bit is interchangea-
ble. The screwdriver may be found underneath the wheel spanner.
Adapter for anti-theft bolt. SEAT recommend you carry the wheel bolt
2
adapter in the vehicle tool kit at all times. The code number of the anti-
theft wheel bolt is stamped on the front of the adapter. In case it is lost,
another adapter can be ordered using this number. Note the anti-theft
bolt code for the wheels and keep it in a place other than the vehicle.
Towline anchorage, removable.
3
Wire hook for pulling off the wheel cover, integral hubcaps and the
4
wheel bolt caps.
Jack. Before storing the jack in the tool kit, fold its hook. The crank
5
must then be folded tight against the side of the jack in order for it to
be safely stored.
Wheel spanner.
6
Wheel bolt cap clips.
7
Note
The jack does not generally require maintenance. If necessary it should be
lubricated with universal grease.
Fuses
Introduction
Due to the constant update of vehicles, fuse assignments depending on
equipment and the use of the same fuse for various electrical devices, at
the time of printing this manual it is not possible to provide an up-to-date
⇒ F ig. 142
Advertisement
Table of Contents
