Table of Contents
Advertisement
50
Cockpit
Storing a speed for the speed warning
● Select the display
Speed warning at --- km/h
.
● Press
on the windscreen wiper lever to store the current speed and
OK
switch off the warning.
● In addition, set the required speed by pressing the rocker switch on the
windscreen wiper lever or buttons
or
on the multifunction steering
wheel for 5 seconds. Next, press
again or wait a few seconds. The
OK
speed is stored and the warning activated.
● To switch off, press
. The stored speed is deleted.
OK
Manually erasing memory 1 or 2
● Select the memory to be erased.
● Press and hold the eject button
for approximately 2 seconds.
OK
Note
On the screen of the SEAT Portable System (supplied by SEAT) ⇒ p age 160
other functions of the multifunction display can be seen.
Advertisement
Table of Contents
