Seat Mii 2014 Owner's Manual page 19

Warning lamp
Safety
Fig. 4 Warning lamp on
the instrument panel
Fig. 5 Indication of seat
belt status in the rear
seats on the instrument
panel display
Operation
Lights
up or Possible cause
flashes
On the instrument panel: Driver's
seat belt not fastened or front pas-

senger seat belt not fastened if the
front passenger seat is occupied.
On the instrument panel: Objects

on the front passenger seat.
Instrument panel display: A pas-
senger in the rear seats has not

fastened their seat belt, if the seat
is occupied.*
On the instrument panel display: A
passenger in the rear seats has

fastened their seat belt, if the seat
is occupied.*
Several warning and control lamps should light up for a few seconds when
the ignition is switched on, signalling that the function is being verified.
They will switch off after a few seconds.
An audible warning will be heard if the seat belts are not fastened as the
vehicle drives off and reaches a speed of more then 25 km/h (15 mph) or if
the seat belts are unfastened while the vehicle is in motion. The seat belt
warning lamp  will also flash.
The warning lamp  does not switch off until the driver and front passenger
fasten their seat belts while the ignition is switched on.
Seat belt status display for rear seats
The seat belt status display on the instrument panel informs the driver,
when the ignition is switched on, whether any passengers in the rear seats
have fastened their seat belts. The symbol  indicates that the passenger
in this seat has fastened "his or her" seat belt
Advice
Seat belts
Solution
Fasten seat belts!
Remove any objects from
the front passenger seat
and store them safely.
Fasten seat belts!
⇒ F ig.
5.

Technical specifications
17